 | מ א ו ש ר הודעה זאת נכתבה על ידי חבר בצוות התמיכה של פורום אטרף. ניתן לסמוך על תוכן הודעה זאת. |
בכל USB אחר ההארדיסק לא עובד גם?
אתה יכול לעשות הסרה לכל הUSB אבל קח בחשבון שכל מה שמחובר בUSB אתה תצטרך להתקין אותו מחדש אם זה מדפסת,מודם,עכבר וכו'.
Resetting your USB Controllers
I'm going to assume that you're running XP (home or pro). Recently I had to refresh my USB ports. This is the sequence I used.
1. Right-click My Computer and select Properties
2. Click Hardware
3. Click Device Manager
4. Expand the Universal Serial Bus Controller
5. Right-click each USB device listed and select Uninstall
6. Click OK to confirm removal of each device
Note: Repeat steps 5 and 6 until all devices under UBS Controller are removed
7. Shut down computer.
CAUTION: Ensure that the Shut Down option is selected instead of Restart.
8. Wait a few seconds and turn computer on. When it reboots you will see "Windows has detected new or added hardware"
Note: You will have to insert your Windows CD, if prompted.
These steps will refresh the USB ports.
Added Notes: 1) If your mouse is a USB you will have to use the keyboard to shut down your computer. 2) It would be wise to unplug everything from your USB ports EXCEPT your mouse and/or keyboard before you restart the computer to avoid Windows replicating any printers, scanners, digi-cams, etc. Once Windows has refreshed your USB controllers and ports, shut down again. reconnect, and restart.
Good Luck